Cylinder Block for 2025 Dodge Durango
Mopar Oil Galley Block Off. Mega Cab. [.375x18x1.343]. Oil Gallery Block Off. [.375-18x1.343]. [.375x18x 1.343]. Lifter Gallery. [.375x18x1.34].
Mopar Dowel Pin
All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine. Item 13 Also Contained in Short Block Engine Kit. Mega Cab. Cylinder Block To Transaxle. Block To Transmission. Cylinder Block To Head. Engine Block To Clutch Housing.
Mopar Camshaft Plug
[m47.93 od 6.4 thk 51.5 flg od]. Lifter Yoke To Cylinder Block. Mega Cab. Camshaft. [.415x.28].
Mopar Cylinder Block to Clutch Housing. Block To Head. Rear Main Oil Seal Retainer To Cylinder Block. [.25x.75]. Or Transmission Housing. Block To Transmission. 1/2 x 3/4.
Mopar Crankshaft Rear Oil Main Seal Retainer Kit
NOT Included With Long Block Engine Install Kit. Includes Rear Crankshaft Oil Seal. Mega Cab. Includes Items 18,19. Includes Gasket,Seal,Pins,I-Sheet. Includes Items 16,19. Includes Oil Seal And Mounting Bolts. Includes Items 17,19. Includes Items 19, 20.
Mopar Rear. Refer To Crankshaft Illustration 405. Also Serviced In Item 8. Also Serviced In Item 4 Retainer Package. Main.
Mopar Hex Flange Head Bolt
M6x1.00x28.00. M14x2.00x80.00. M6x1.00x24.00. M6x1.0x24.0. Rear Mail Oil Seal Retainer To Crankshaft. Rear Cranshaft Oil Seal Retainer To Cylinder Block.
Mopar Plug, Right And Left
After 6/14/04. After 4/26/04. Mega Cab. Coolant Drain [.25x18x.69]. 0.250-18x.690. Cylinder Block Water Jacket Drain. Oil Gallery, Front. Cylinder Block Coolant Drain Right And Left Side.
Mopar Hex Flange Head Bolt, Mounting, Side
Bearing Cap To Engine Block. [M8x1.25x45.00]. Main Bearing Cross. Side Main Bearing Cap To Cylinder Block.
Mopar Hex Flange Head Bolt, Mounting
Bracket to Rear Axle.
Mopar Automatic Transmissions. Installation. Also Serviced in Crankshaft Assembly. Crankshaft Pilot.
Mopar Main Bearing Cap To Cylinder Block. Main Bearing Side To Cylinder Block. M12x1.75x91.50. M12x1.75x89.10.
Mopar Main Bearing Cap To Cylinder Block. M12x1.75x1.25x152.10. M12x1.75xm8x1.25x154.50. Main Bearing Side To Cylinder Block. Oil Pickup Tube To Main Bearing. Main Bearing Cap Oil Pickup Tube.