Engine Identification, Service Engines & Engine Service Kits for 2021 Dodge Challenger
Mopar Installation. The Gaskets That Are Included With The Upper And Lower Engine Gasket Kits May NOT Be Included With This Kit. If Gasket Is NOT Included It Is Indicated Below.
Mopar Valve Guide Seal, Right Side
NOT Included With Long Block Engine Install Kit
Mopar NOT Included With Long Block Engine Install Kit
Mopar Large O Ring Upper Half Of PCV Valve Is Only Serviced.Small O Ring Lower Half Is Serviced With PCV Only
Mopar NOT Included With Long Block Engine Install Kit or Upper Engine Gasket Kit, Must Order Separate
Mopar NOT Included With Long Block Engine Install Kit
Mopar Cylinder Head Cover Gasket Kit
Includes Spark Plug Well Gaskets
Mopar Spark Plug Well Gasket
Included With Long Block Engine Install Kit
Mopar Crankshaft Rear Oil Seal Retainer
NOT Included With Long Block Engine Install Kit. Includes Rear Crankshaft Seal Gasket
Mopar Early Production Vehicle With Structural Collar Cast Into Engine Oil Pan
Mopar Double Ended Stud
M12X1.75XM8X1.25X154.50. Main Bearing Cap To Cylinder Block
Mopar Installation. The Gaskets That Are Included With The Upper And Lower Engine Gasket Kits May NOT Be Included With This Kit. If Gasket Is NOT Included It Is Indicated Below.
Mopar Valve Guide Seal, Left Side
NOT Included With Long Block Engine Install Kit
Mopar NOT Included With Long Block Engine Install Kit
Mopar Large O Ring Upper Half Of PCV Valve Is Only Serviced.Small O Ring Lower Half Is Serviced With PCV Only
Mopar NOT Included With Long Block Engine Install Kit or Upper Engine Gasket Kit, Must Order Separate
Mopar NOT Included With Long Block Engine Install Kit
Mopar Cylinder Head Cover Gasket Kit
Includes Spark Plug Well Gaskets
Mopar Spark Plug Well Gasket
Included With Long Block Engine Install Kit
Mopar Crankshaft Rear Oil Seal Retainer
NOT Included With Long Block Engine Install Kit. Includes Rear Crankshaft Seal Gasket
Mopar Early Production Vehicle With Structural Collar Cast Into Engine Oil Pan
Mopar Double Ended Stud
M12X1.75XM8X1.25X154.50. Main Bearing Cap To Cylinder Block
Mopar Ball Stud
60X2.14X21.59. Side. To Intake Manifold
Mopar Ball Stud
60X2.14X21.59. Side. To Intake Manifold
Mopar SERVICE WARNING: If The Original Engine Has Experienced A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure -The Intake Manifold Must Be Replaced With A New Manifold.
Mopar SERVICE WARNING: If The Original Engine Has Experienced A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure -The Intake Manifold Must Be Replaced With A New Manifold.
Mopar SERVICE WARNING: If The Original Engine Has Experienced A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure -The Intake Manifold Must Be Replaced With A New Manifold.
Mopar SERVICE WARNING: If The Original Engine Has Experienced A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure -The Intake Manifold Must Be Replaced With A New Manifold.. OE Equivalent Supporting Sustainera
Mopar SERVICE WARNING: If The Original Engine Has Experienced A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure -The Intake Manifold Must Be Replaced With A New Manifold.





