Cylinder Block for 2006 Dodge Ram 3500
Mopar Long Block Engine
SERVICE WARNING: If The Orginal Engine Has Experienced A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure - The Intake Manifold Must Be Replaced With A New Manifold.. An Updated Cylinder Head With A EGR Valve Hole May Be Received In Place Of The Old. If Vehicle Did Not Orginally Have A EGR Valve Use Cover kit 53032739AA To Cover The EGR Hole In The Cylinder Head.
Mopar SERVICE WARNING: If The Orginal Engine Has Experienced A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure - The Intake Manifold Must Be Replaced With A New Manifold.. An Updated Cylinder Head With A EGR Valve Hole May Be Received In Place Of The Old. If Vehicle Did Not Orginally Have A EGR Valve Use Cover Kit 53032739AA To Cover The Hole In The EGR Hole In The Cylinder Head.
Mopar SERVICE WARNING: If The Orginal Engine Has Experiencd A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure - The Intake Manifold Must Be Replaced With A New Manifold.
Mopar SERVICE WARNING: If The Orginal Engine Has Experiencd A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure - The Intake Manifold Must Be Replaced With A New Manifold.
Mopar SERVICE WARNING: If The Orginal Engine Has Experiencd A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure - The Intake Manifold Must Be Replaced With A New Manifold.
Mopar Crankshaft Rear Oil Seal Retainer Package
NOT Included With Long Block Engine Install Kit. Includes Rear Crankshaft Seal Gasket
Mopar Hex Flange Head Screw
M6X1.00X24.00. Rear Crankshaft Seal Retainer To Cylinder Block
Mopar Mds Solenoid. For Engines Without Multi-Displacement System
Mopar Plug
.250-18X.413. Oil Gallery Middle and Right Rear Of Cylinder Block
Mopar Block To Clutch Housing Dowel
[1/2 x 3/4]. Cylinder Block To Transmission
Mopar Dowel
Item 13 Pin Kit Also Contained in Short Block Engine Kit. All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine.. Cylinder Heads To Cylinder Block